P = Generic / Branding A = AC / OD Type 5 = 14.3 SEER2 / SEER2 S = Single-Stage / OE Design Type A = Major Iteration / Major Series N = 208/230-1 / Voltage 4 = R-410A / Refrigerant 36 = 3 Ton / Nominal Cooling 0 = Standard / Feature 0 = Standard / Special Feature W = Standard Southwest AC / Region
NOTE: Ratings are subject to change at any time. Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.
Features / Benefits Efficiency 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2 - 13.0 EER2 (11.2 - 13.0 EER) Indoor air quality accessories available Reliability R-410A refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost. Scroll compressor Internal pressure relief valve Internal thermal overload Filter drier Durability Protection Package: Solid, durable sheet metal construction Dense wire coil guard Applications Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.) Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits. Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
59SC6 Carrier 96% Gas furnace
The 59SC6 Multipoise Comfort™ Condensing Gas Furnace features year-round electrical efficiency when paired with a compatible condensing unit. Energy efficiency is at the heart of this furnace with up to 96.5% AFUE, gas efficiency and the electrically-efficient fixed-speeds, constant torque (MCT) ECM blower motor. Improved serviceability with the 3 digit status display and NFC enabled board allowing setup via the service tech app. This gas furnace also features 4-way multipoise installation flexibility, and is available in eleven model sizes. All sizes except the 26,000 BTUh model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUh model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada, and select sizes are certified for mobile/manufactured home use with conversion kit accessory.
PERFORMANCE Multi 18-speed, constant torque (MCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation. Enhanced diagnostics with easy to read 3-digit display for faults and status. Single-speed inducer motor, and single-stage gas valve. Silicon Nitride PowerHeat™ Hot Surface Igniter. Dual fuel capable HybridHeat™ with a compatible heat pump and thermostat for energy-saving heating performance Adjustable blower speed for heating and cooling. Aluminized-steel primary heat exchanger. Stainless-steel condensing secondary heat exchanger. INSTALLATION FLEXIBILITY On-board NFC antenna makes setup a tap away when using the Carrier service technician app. 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for optional venting through-the-cabinet downflow venting capability. Factory-configured ready for upflow applications. Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service. Two-pipe venting, single-pipe venting or ventilated combustion air. APPLICATIONS Approved for Twinning applications with accessory kit (060E17--14, 080E17--16, 080E21--20, 100E21--20, 120E24--22, 140E24--22 models, only). Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. Convertible to propane with gas conversion accessory kit. CERTIFICATIONS All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE. Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193. All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirements. Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
CAPMA Multi-Position Evaporator Coil Upflow or Horizontal positions
FEATURES
Insulated case Rugged, durable Fiberglass Reinforced Thermoset Polyester (FRTP) base pan on A-coils Enhanced fins and grooved tubes Thermostatic Expansion Valve metering device Cabinet knockouts for UV Lights on A-coils Factory installed with R-410A TXV
HORIZONTAL APPLICATIONS
Primary and secondary drain connections help ensure proper drainage. All Performance™ Series coils include our TXV for enhanced control over refrigerant flow for compressor protection and improved system reliability. Performance™ Series A-coils are seated on our rugged, durable base pan. Base pan design improves drainage to help eliminate standing water and potential mold growth. Performance™ Series A-coil cabinet knockouts allow for the convenient mounting of Carrier air quality enhancing UV Lights.
EFFICIENCY
With energy costs on the rise, the Performance™ Series evaporator coils can help maintain and even enhance your Seasonal Energy Efficiency Ratio or SEER number. SEER is like gas mileage. The higher the gas mileage or SEER, the more efficient the automobile or system is. While a higher efficiency system can cost more to purchase, it can pay for itself over the lifetime of the system by lowering utility bills.
The Carrier Performance™ Series evaporator coils are specifically designed to enhance your comfort and energy savings. Properly matched components help maximize efficiency while minimizing your utility costs. A Thermostatic Expansion Valve (TXV) on every Performance™ Series evaporator coil offers precise refrigerant distribution to deliver higher efficiency ratings.
