Carrier Comfort 4.0 ton 15 SEER2 1 Stg. AC w/90K 1 Stg. 80% VS Gas Furnace|CAPMP Multi-Position Coil|24SCA548 CAPMP4821AL 58SC0B090M21--16

Add to cart to view quote!
In stock

Comfort 15 SEER2 1 Stg AC| 24SCA5486 CAPMP4821AL 58SC0B090M21--16 


Save an additional10%, use coupon code save10!
*Important note regarding this item:
For Inventory Verification call 1-866-598-7281
Free Shipping in the Continental US!

24SCA5 15 SEER2 Comfort Air ConditionerFeatures / Benefits

13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2 – 13.0 EER2 (11.2 - 13.0 EER)
Microtube Technology refrigeration system
Indoor air quality accessories available
Puron refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost.
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Filter drier
WeatherArmor™ Protection Package:
Solid, durable sheet metal construction
Dense wire coil guard
Long–line – up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer.


The 58SC0A/58SC1A Comfort™ Series 4-way Multipoise Gas Furnaces feature Carrier’s QuieTech™ noise reduction system for
incredibly quiet induced draft operation. Applications are easy with 4-way multipoise design, through-the-furnace downflow venting, 13 different venting options, and designed for easy service access. An inner blower door is provided for tighter sealing in sensitive applications. The 58SC0A/58SC1A furnaces are approved for use with natural or propane gas, and the 58SC1A- Low NOx units are designed for California installations and can be installed in air quality management districts with a 40 ng/J NOx emissions limit.

• QuieTech™ noise reduction system
• Fixed-Speeds, Constant Torque (FCT) ECM blower motor
• Microprocessor based control center
• Adjustable heating air temperature rise
• Adjustable cooling airflow
• Enhanced diagnostics with LED and reflective sight glass
• Stores fault codes during power outages
• Power Heat™ Igniter
• Draft safeguard switch designed to ensure proper furnace venting
• Inner door for tighter sealing, fully insulated blower compartment
• 4-way Multipoise furnace, 13 vent applications
• HYBRID HEAT® Dual Fuel System compatible
• All models are chimney friendly when used with accessory vent kit
• Select sizes approved for twinning, refer to accessory kit listing
• Compact design - only 33-1/3 in. (847 mm) tall
• Propane convertible with gas conversion accessory
• Convenient Air Purifier and Humidifier connections
• Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air
leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with
ASHRAE standard 193
• Residential installations eligible for consumer financing through the
Retail Credit Program

CAPMP Multi Position Coil

This coil is available for use in Puron® Refrigerant (R-410A) only. It is a cased A-coil that is housed in a durable, 24 gauge, pre-painted taupe metallic cabinet. The fully-insulated cabinet (foil faced with R-2.1 insulation properties) provides for quiet efficient operation of the evaporator coil. 

Performance - Designed with performance in mind, this new A-coil offers low pressure drops to enhance system performance and airflow characteristics.Thermostatic Expansion Valves (TXV) - All Bryant coils have refrigerant-specific, factory-installed TXVs.Durable Condensate Pans (2) - The corrosion-resistant drain pans, one for vertical applications and one for horizontal, are designed in a “fiberglass reinforced thermoset polyester” material (FRTP) that offers unsurpassed pan strength. It is engineered with proper slope in both pans to help ensure water drainage, improved moisture removal, and home comfort.
Refrigerant Connections - This coil is provided with industry proven sweat connections for leak-free operation to maintain system reliability. The side mounting tubing to the coil slabs allows for easy cleaning/servicing of the coils, as well as easy access to the TXV.
Burst Pressure - This coil meets or exceeds burst pressure of 2100 psi, which is at least three to five times the pressure it will see in actual application.
UV Knockouts - The cased coil also comes with factory-installed UV knockouts for quick and easy installation of UV lights.
Serviceability - This coil comes with a “split delta plate” for easy, quick access to the coil for service and cleaning. Also, after the door is removed, the coil is removable from the front of the unit without use of any tools.

Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer.

More Information
Brand/ Manufacturer Carrier
Model #24SCA536 CAPMP4821LAL 58SC0B090M21--16
System TypeCooling with Gas Heat
Product SeriesComfort 15 SEER2 1 Stg AC
Nominal SEER15 SEER
System SEER14 SEER
Rated SEER14.5 SEER2
Rated EER12.0 EER2
Install PositionMulti-Pos. A Coil/CAPMP
AFUE %80%
Pad Size36x36x3
Suction Line Size7/8"
Liquid Line Size3/8"
Write Your Own Review
You're reviewing:Carrier Comfort 4.0 ton 15 SEER2 1 Stg. AC w/90K 1 Stg. 80% VS Gas Furnace|CAPMP Multi-Position Coil|24SCA548 CAPMP4821AL 58SC0B090M21--16
Ask a question