37MVRAQ|D5MVHAQ Series 1 Stage R454B Ductless Heat Pump System

Purpose: Heating & Cooling

Type: R454B Heat Pump

Zones: Single-Zone

Overall Efficiency: Not ENERGY STAR® certified

Cooling Energy Savings: Enhanced

Cooling Efficiency: Up to 22.4 SEER2

Heating Energy Savings: Moderate

Heating Efficiency: Up to 9.4 HSPF2

Outdoor Sound Performance: Extremely quiet

Indoor Sound Performance: Not applicable

Sound Level (As Low As): 52.5 decibels

Cooling Operating Range: 5°~122 ° F (-15°~50° C)

Heating Operating Range: 5°~75° F (-15°~25° C)

Sizes: 0.75 – 3.0 Ton

Voltage: 115V or 208/230V

Application: Residential

Proposition 65 Product Warnings: 343824-2 Lead and Lead Compounds

LOW SOUND LEVELS When noise is a concern, the ductless systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork. 

SECURE OPERATION If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through the ductwork. In addition, since outdoor units can be installed close to an outside wall, coils are protected from vandals and severe weather. 

FAST INSTALLATION This compact ductless system is simple to install. A mounting bracket and duct work is needed for the indoor units, and only wire and piping need run between the indoor and outdoor units. These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the air handler systems the equipment of choice, especially in retrofit situations. 

SIMPLE SERVICING AND MAINTENANCE Removing the top panel on outdoor units provides immediate access to the control compartment, providing a service technician access to check unit operation. In addition, the draw-thru design of the outdoor section means that dirt accumulates on the outside surface of the coil. Coils can be cleaned quickly from the inside using a pressure hose and detergent. On all indoor units, service and maintenance expense is reduced due to easy-to-use cleanable filters. In addition, these high wall systems have extensive self-diagnostics to assist in troubleshooting. 

BUILT-IN RELIABILITY Ductless system indoor and outdoor units are designed to provide years of trouble-free operation. The high wall indoor units include protection against freeze-up and high evaporator temperatures on heat pumps. The condensing units on heat pumps are protected by a three minute time delay before the compressor starts the over-current protection and the high temperature protection. 

INDIVIDUAL ROOM COMFORT Maximum comfort is provided because each space can be controlled individually based on usage pattern. The air sweep feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps. 

ECONOMICAL OPERATION The ductless system design allows individual room heating or cooling when required. There is no need to run large supply-air fans or chilled water pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted while air moves through the ducts. EASY-TO-USE CONTROLS The high wall units have microprocessor-based controls to provide the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between the user and the unit. 

ACCESSORIES Customizing these ductless systems to your application is easily accomplished. Adding a condensate pump accessory to the high wall fan coil provides installation flexibility.