24SPA6 Performance 1 Stage Air Conditioning Condenser
This unit has been designed utilizing Carrier’s Puron refrigerant. The environmentally sound refrigerant allows you to make a responsible decision in the protection of the earth’s ozone layer.
NOTE: Ratings contained in this document are subject to change at any time. Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.
Industry leading
Features / Benefits Efficiency • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2 – 13.0 EER2 (11.2 - 13.0 EER) • Microtube Technology refrigeration system • Indoor air quality accessories available Reliability • Puron refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost. • Scroll compressor • Internal pressure relief valve • Internal thermal overload • Filter drier Durability WeatherArmor™ Ultra Protection Package: • Solid, Durable sheet metal construction • Steel louver coil guard • Baked-on, complete outer coverage, powder paint Applications • Long–line – up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.) • Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
59SC6A Comfort 96% AFUE Gas Frunace
The 59SC6A Multipoise Comfort™ Condensing Gas Furnace features year-round electrical efficiency when paired with a compatible condensing unit. Energy efficiency is at the heart of this furnace with up to 96.5% AFUE, gas efficiency and the electrically-efficient fixed-speeds, constant torque (MCT) ECM blower motor. Improved serviceability with the 3 digit status display and NFC enabled board allowing setup via the service tech app. This gas furnace also features 4-way multipoise installation flexibility, and is available in eleven model sizes. All sizes except the 26,000 BTUh model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUh model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada, and select sizes are certified for mobile/manufactured home use with conversion kit accessory.
PERFORMANCE Multi 18-speed, constant torque (MCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation. Enhanced diagnostics with easy to read 3-digit display for faults and status. Single-speed inducer motor, and single-stage gas valve. Silicon Nitride PowerHeat™ Hot Surface Igniter. Dual fuel capable HybridHeat™ with a compatible heat pump and thermostat for energy-saving heating performance Adjustable blower speed for heating and cooling. Aluminized-steel primary heat exchanger. Stainless-steel condensing secondary heat exchanger. INSTALLATION FLEXIBILITY On-board NFC antenna makes setup a tap away when using the Carrier service technician app. 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for optional venting through-the-cabinet downflow venting capability. Factory-configured ready for upflow applications. Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service. Two-pipe venting, single-pipe venting or ventilated combustion air. APPLICATIONS Approved for Twinning applications with accessory kit (060E17--14, 080E17--16, 080E21--20, 100E21--20, 120E24--22, 140E24--22 models, only). Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. Convertible to propane with gas conversion accessory kit. CERTIFICATIONS All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE. Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193. All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirements. Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
CVPMA Multi Position Evaporator Coil
CVPMA****XMC AC Only Evaporator M Coil| Cased Multi-Position Note: Follow Evaporator Application Install Instructions found in Product Data
Nomenclature Example & Description CVPMA6124XMC C = Coil / Product V = V-Coil / Type P = Puron® Refrigerant (R-410A) / Refrigerant Type M = Multi-poise / Coil Configuration A = Major Series / Cabinet Finish 60 - 62 = 5 Ton / Unit Capacity (Nom.) 24 = 24-in (610 mm) / Cabinet Width (Nom.) X = TXV / Metering Device M= Microchannel / Tubing Design C = Cooling only / Variations
This evaporator coil incorporates proven standards for reliable system operation and performance throughout the life of this product. These quality coils, manufactured and installed as part of a total comfort system, provide AHRI-rated performance ratings and are additionally listed with UL and c-UL. Available for use in Puron® R-410A refrigerant only, it is a cased V-coil that is housed in a durable, 24-gauge, pre-painted taupe metallic cabinet. The fully insulated cabinet (foil faced with R-2.1 insulation) provides for quiet efficient operation of the evaporator coil.
IMPORTANT: This design is for AC applications only.
DESIGN FEATURES Performance - Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics. Thermostatic Expansion Valves (TXV) - All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve. Durable Condensate Pan - The corrosion-resistant drain pan is designed of a “Polybutylene terephthalate” material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort. Condensate Drain Pan Plugs - The drain pan is supplied with five water-tight drain plugs (three vertical; two horizontal) to prevent leakage from unused drain connections. Refrigerant Connections - Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube—once the pipe swages are cut off—to accommodate braze-less compression fittings. Burst Pressure - Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling-only application. UV Knockout - This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Serviceability - Comes with a “no delta plate” for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools. Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
