24SPA6 Performance 1 Stage Air Conditioning Condenser
This unit has been designed utilizing Carrier’s Puron refrigerant. The environmentally sound refrigerant allows you to make a responsible decision in the protection of the earth’s ozone layer.
NOTE: Ratings contained in this document are subject to change at any time. Always refer to the AHRI directory www.ahridirectory.org) for the most up-to-date ratings information.
Features / Benefits
• 13.8 - 16.0 SEER2 (14 - 16.5 SEER) /
11.2 – 13.0 EER2 (11.2 - 13.0 EER)
• Microtube Technology refrigeration system
• Indoor air quality accessories available
• Puron refrigerant - environmentally sound, won’t deplete the ozone
layer and low lifetime service cost.
• Scroll compressor
• Internal pressure relief valve
• Internal thermal overload
• Filter drier
WeatherArmor™ Ultra Protection Package:
• Solid, Durable sheet metal construction
• Steel louver coil guard
• Baked-on, complete outer coverage, powder paint
• Long–line – up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
• Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
FJ4 Aluminum Fan Coil/ VS Air Handler
F = Fan Coil / Product
J =Type / Tier
4 = Puron® / Refrigerant Type
D = Major Series
N = 208/230V, 1 ph, 60 Hz / Electrical
X = Singular, TXV / Cabinet Type / Metering Device
A = 14" / Cabinet Width
18 = 18,000 / Nominal Capacity
L = Aluminum / Coil Type
00 = No Heat / Electric Heater Size
The FJ4 fan coil has the proven technology of fan coil units with Puron® refrigerant as well as vertical and horizontal applications. The design features contoured condensate pans with rugged drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.
Standard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all Carrier heat pumps and air conditioners. Units come with solid state fan controls, 1-inch (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Units can accommodate factory- and/or field-installed heaters from 3 to 30 kW.
Assembled at the factory compliant with low leak requirements of less than 2% cabinet leakage rate at 0.5 inches W.C. and 1.4% cabinet leakage rate at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
The FJ4 fan coil design is loaded with popular features. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors allowing reliable air delivery with increased static pressure. It comes in a pre-painted (taupe metallic) galvanized steel casing and a factory-supplied power plug for ease of installation. The unit is shipped with a Puron refrigerant TXV (sizes 18–60).
Multi-tap ECM (electronic commutating motor) motors - all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board.
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Cabinet construction features innovations designed to prevent cabinet sweating.
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements.
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet (taupe metallic)
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units
2-piece modular design available for 42 thru 60 sizes. Facilitates attic and crawlspace installations.
Horizontal hanging provisions on cabinet
No tools required to access filter.
Newly improved filter rack area filter door insulation added for improved air seal.
Factory-installed heater packages available on select models (5 through 15 kW).
3 through 30 kW accessory heaters - field installed
Factory-supplied power plug
Easy plug-in provisions for heater installation.
Entry options for high and low voltage wiring hook-up.
Leak-preventing sweat connections
Thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications.
Prop 65 icon
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
|Model #||24SPA624 FJ4DNXB24L|
|System Type||Cooling Only|
|Product Series||Perform 16 SEER2 1Stg AC|
|Nominal SEER||16 SEER|
|System SEER||15 SEER|
|Suction Line Size||3/4"|
|Liquid Line Size||3/8"|