24SCA5 15 SEER2 Comfort Air ConditionerFeatures / Benefits
Efficiency 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2 – 13.0 EER2 (11.2 - 13.0 EER) Microtube Technology refrigeration system Indoor air quality accessories available Reliability Puron refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost. Scroll compressor Internal pressure relief valve Internal thermal overload Filter drier Durability WeatherArmor™ Protection Package: Solid, durable sheet metal construction Dense wire coil guard Applications Long–line – up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.) Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits. Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
THE 59SC6A 96% AFUE GAS FURNACE
The 59SC6A Multipoise Comfort™ Condensing Gas Furnace features year-round electrical efficiency when paired with a compatible condensing unit. Energy efficiency is at the heart of this furnace with up to 96.5% AFUE, gas efficiency and the electrically-efficient fixed-speeds, constant torque (MCT) ECM blower motor. Improved serviceability with the 3 digit status display and NFC enabled board allowing setup via the service tech app. This gas furnace also features 4-way multipoise installation flexibility, and is available in eleven model sizes. All sizes except the 26,000 BTUh model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUh model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada, and select sizes are certified for mobile/manufactured home use with conversion kit accessory.
PERFORMANCE Multi 18-speed, constant torque (MCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation. Enhanced diagnostics with easy to read 3-digit display for faults and status. Single-speed inducer motor, and single-stage gas valve. Silicon Nitride PowerHeat™ Hot Surface Igniter. Dual fuel capable HybridHeat™ with a compatible heat pump and thermostat for energy-saving heating performance Adjustable blower speed for heating and cooling. Aluminized-steel primary heat exchanger. Stainless-steel condensing secondary heat exchanger. INSTALLATION FLEXIBILITY On-board NFC antenna makes setup a tap away when using the Carrier service technician app. 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for optional venting through-the-cabinet downflow venting capability. Factory-configured ready for upflow applications. Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service. Two-pipe venting, single-pipe venting or ventilated combustion air. APPLICATIONS Approved for Twinning applications with accessory kit (060E17--14, 080E17--16, 080E21--20, 100E21--20, 120E24--22, 140E24--22 models, only). Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. Convertible to propane with gas conversion accessory kit. CERTIFICATIONS All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE. Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193. All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirements. Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
CAPMP Multi Position Coil
This coil is available for use in Puron® Refrigerant (R-410A) only. It is a cased A-coil that is housed in a durable, 24 gauge, pre-painted taupe metallic cabinet. The fully-insulated cabinet (foil faced with R-2.1 insulation properties) provides for quiet efficient operation of the evaporator coil.
DESIGN FEATURES Performance - Designed with performance in mind, this new A-coil offers low pressure drops to enhance system performance and airflow characteristics.Thermostatic Expansion Valves (TXV) - All Bryant coils have refrigerant-specific, factory-installed TXVs.Durable Condensate Pans (2) - The corrosion-resistant drain pans, one for vertical applications and one for horizontal, are designed in a “fiberglass reinforced thermoset polyester” material (FRTP) that offers unsurpassed pan strength. It is engineered with proper slope in both pans to help ensure water drainage, improved moisture removal, and home comfort. Refrigerant Connections - This coil is provided with industry proven sweat connections for leak-free operation to maintain system reliability. The side mounting tubing to the coil slabs allows for easy cleaning/servicing of the coils, as well as easy access to the TXV. Burst Pressure - This coil meets or exceeds burst pressure of 2100 psi, which is at least three to five times the pressure it will see in actual application. UV Knockouts - The cased coil also comes with factory-installed UV knockouts for quick and easy installation of UV lights. Serviceability - This coil comes with a “split delta plate” for easy, quick access to the coil for service and cleaning. Also, after the door is removed, the coil is removable from the front of the unit without use of any tools.
Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
