York 17 Series R410A Horizontal Discharge Modulating Heat Pump
The HMH7 horizontal discharge modulating heat pumps are the outdoor section of a highefficiency
heating and cooling system. The outdoor units are designed to be connected to a
matching indoor coil with sweat connect lines. Each unit is to be matched with one ducted indoor
unit and is not designed for application in a ductless configuration. Sweat connect units are factory
charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.
360 DC inverter driven technology: With 360 all DC inverter driven technology, compressor
rotation direction and speed is controlled optimizing energy usage and compressor stability
through the spectrum of operating conditions. This guarantees optimal space temperature
control while providing quiet operation.
Pressure sensor: This unit contains pressure sensing technology, which detects low pressure
in cooling mode and high pressure in heating mode to protect the system from damage.
Intelligent control can also be realized by calculating the indoor coil temperature from system
Smaller outdoor form factor for installation flexibility: This side-discharge outdoor unit
saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard or
Stable temperature control means optimal comfort: The DC inverter is able to provide full
capacity at startup to cool/warm quickly and adjusts speed to prevent temperature fluctuation
and energy loss.
Agency Listed: Safety certified by CSA to UL 1995/CSA 22.2. Performance certified to ANSI/
AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program
JHVT & JHET AIR HANDLER
MaxAlloyTM Coil - Long life aluminum coils built to deliver lasting performance, efficiency, and reliability
Next Generation Even-Flow Distributor - Designed for balanced refrigerant flow and even coil circuit performance
Next Generation High-Efficiency Blower - Delivers increased airflow and reducedd blower watts by 10%, using a standard ECM motor
Two-Stage Operation - Provides flexibility in application with single and two-stage outdoor equipment Next Generation Insulation and Gasket Design - reduces thermal transmission paths and reduces sweating Electric Heat Kit - 8HK field-installed series available for easy installation and service application Tool-less Filter Access - Sliding latch design provides quick and easy access Designed For Easy Installation and Service - Casing size of 20.5 in., smooth sides, and rigid construction provide ease of attic access and tight applications. Front facing components, slide out blower, laser cut knock outs and integrated duct flanges shorten install time. Cabinet Air Leakage - Less than 2% at 1 in. W.C. external static pressure when tested in accordance with ASHRAE Standard 193 Long Lasting Quality - Structural components made of post-powder painted aluminum or galvanized steel to prevent corrosion Thermoset Drain Pan - Positive slope for drainage to reduce cause for potential mold or contaminants.
|Model #||HMH72B36 JHETC36DBCS2N1|
|System Type||Cooling with Heat Pump|
|Product Series||HMH7 17 Mod. Hybrid|
|BTU||36,000 Cooling 95F/36,000 Heating 47F/25,000 17F/23,500 5F|
|Nominal SEER||17 SEER|
|System SEER||17 SEER|
|Suction Line Size||3/4"|
|Liquid Line Size||3/8"|