SKU
210998498
Special Price $5,055.00 Regular Price $6,319.00
HERE IS WHAT YOU GET:
Payne 15.0 SEER2 1 Stg Heat Pump| PH5SAN430 PF4MNXC42L

 

Save an additional10%, use coupon code save10!
*Important note regarding this item:
For Inventory Verification call 1-866-598-7281
Free Shipping in the Continental US!
Write Your Own Review
You're reviewing:Payne 2.5 Ton 15 SEER2 Heat Pump w/Multi Speed VS ECM Air Handler R-410A| PH5SAN430 PF4MNXC42L

PH5S Single-Stage Split-System Heat Pump with R-410A Refrigerant 1-1/2 To 5 Tons

This unit has been designed utilizing non-ozone depleting R-410A refrigerant. Heat pumps with R-410A refrigerant provide a collection of features unmatched by any other family of equipment.

NOTE: Ratings contained in this document are subject to change at any time. Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.

Efficiency
• 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
(depending on unit size and indoor combination installed)
• Indoor air quality accessories available Sound
• Sound levels as low as 69 dBA with accessory sound blanket Comfort
• System supports programmable or standard thermostat controls
Reliability
• Non-ozone depleting R-410A refrigerant
• Scroll compressor
• Internal pressure relief valve
• Internal thermal overload
• Loss of charge switch
• Filter drier
• Balanced refrigeration system for maximum reliability
Durability
Protection Package:
• Solid, durable sheet metal construction
• Dense wire coil guard 

 

PF4MNX Multi-Position Air Handler(Aluminum Coil)

Description
The design features contoured condensate pans with rugged drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.
Standard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all Payne heat pumps and air conditioners. Units come with solid state fan controls, 1-inch (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Units can accommodate factory- and/or field-installed heaters from 3 to 30 kW.
Assembled at the factory compliant with low leak requirements of less than 2% cabinet leakage rate at 0.5 inches W.C. and 1.4% cabinet leakage rate at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
The PF4MN fan coil design is loaded with popular features. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors allowing reliable air delivery with increased static pressure. It comes in a pre-painted (taupe metallic) galvanized steel casing and a factory-supplied power plug for ease of installation. The unit is shipped with a R-410A refrigerant TXV (sizes 18–60).

STANDARD FEATURES
Multi-tap ECM (electronic commutating motor) motors – all sizes
Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board.
Five available speed tags to meet a wide range of applications
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Cabinet construction features innovations designed to prevent cabinet sweating.
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements.
Super-thick R-4.2 insulation with vapor barrier
Pre-painted galvanized steel cabinet (taupe metallic)
Design meets stringent regulations for cabinet air leakage of less than 2% when tested at 0.5 inches W.C., and cabinet air leakage less than 1.4% at 0.5 inches W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units
Horizontal hanging provisions on cabinet
No tools required to access filter.
Newly improved filter rack area filter door insulation added for improved air seal.
3 through 30 kW accessory heaters - field installed
Factory-supplied power plug
Easy plug-in provisions for heater installation.
Entry options for high and low voltage wiring hook-up.
Leak-preventing sweat connections
Thermostatic expansion valve, TXV, on all coils
Designed for manufactured housing applications.
Prop 65 
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

More Information
Brand/ Manufacturer Payne
Model #PH5SAN430 PF4MNXC42L
System TypeCooling with Heat Pump
Product SeriesPayne 15 SEER2 1 Stg HP
Tons2.5
BTU30,000
Nominal SEER15 SEER
System SEER14 SEER
Rated SEER14.5
Rated EER12
HSPF Rating7.5
RefrigerantR-410A
Install PositionMulti-Position
AFUE %N/A
Pad Size36x36x3
Suction Line Size3/4"
Liquid Line Size3/8"
Close