Carriers 24VNA6 with Greenspeed Intelligence is a variable speed cooling product providing up to 26 SEER cooling efficiency. Lower speed operation, when needed in cooling, for enhanced comfort and dehumidification. This product has been designed and manufactured to meet Energy Star criteria for energy efficiency when matched with appropriate coil components. Refer to the combination ratings in this Product Data for system combinations that meet Energy Star guide lines.
NOTE: Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.
Features Energy Efficiency Up to 26 SEER, 16.5 EER Microtube Technology refrigeration system Indoor air quality accessories available
Sound Sound level as low as 51 dBA in low speed.
Comfort Variable speed compressor with capacity range from 25-100% Air cooled Inverter variable speed drive System requires Infinity Control with Greenspeed capability Energy Tracking capability with the Infinity Control with latest software version (Energy Tracking has the ability to monitor and estimate the energy consumption of your Infinity system.)
Reliability Non-ozone depleting Puron refrigerant Front-seating service valves Greenspeed Intelligence actively monitors critical system parameters High pressure switch Discharge and suction pressure transducer TXV for cooling Filter drier (field installed) Internal crankcase heater standard Flexibility and installation: 2 control wires to outdoor unit Minimum and maximum airflow adjustments
Durability WeatherArmor Ultra protection package: Solid, Durable sheet metal construction Steel louver coil guard Baked-on, complete outer coverage, powder paint Applications Long-line - up to 250 feet (76.2 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser.
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
58TN0 Infinity 80% 2 Stage Gas Furnace
THE INFINITY® 80 GAS FURNACE
The Infinity® 80 Variable- Speed, 4-way Multipoise Gas Furnaces offer unmatched comfort with ComfortHeat® and IdealHumidity® technologies in an 80% AFUE gas furnace. You get all the benefits of a ComfortHeat technology furnace: reduced drafts, reduced sound levels, longer cycles, less temperature swings between cycles, and less temperature differences between rooms. With the variable speed blower motor, homeowners can now economically run constant fan to help eliminate temperature differences throughout the house and to get better indoor air quality.
This furnace with IdealHumidity technology also increases comfort in the summer by wringing out extra humidity when needed. The Infinity 80 furnaces are approved for use with natural or propane gas, and the 58TN1A - Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
Carrier Infinity® System When the Infinitys 80 variable- speed gas furnace is matched with the Infinitys Control and an air conditioner or heat pump, you will experience the ultimate in Comfort Heat and IdealHumidity through unparalleled control of temperature, hmidity, indoor air quality,and zoning. The Carrier Infinity System also provides uprecedented ease of use through on- screen,text- based service reminders and equipment malfunction alerts.For even greater comfort and convenience, match the Infinity 80 furnace with an Infinity air conditioner or create a fully communicating system, requiring only 4 thermostat wires between system components, and troubleshooting can even be done from the outdoor unit without entering the home. Optional remote access through telephone or Internet is also available when combined with a remote connectivity kit.
PERFORMANCE Infinity System--match with the Infinity Control for Infinity System benefits Variable-speed ECM blower motor Increased SEER ratings for AC and HP systems as compared to the Air Conditioning Heating and Refrigeration Institute’s standard coil--only rating when paired with selected Carrier evaporator coils. Perfectly matches CFM to cooling system at all static points ComfortHeat® Technology Intelligent microprocessor control Very low operating sound through low-stage operation and QuieTecht system Integral part of the IdealHumidity System Maximum dehumidification selection for summer time cooling Full IdealHumidity benefits including “Super Dehumidify” SmartEvapt--Humidity control when using a Thermidistatt / Infinity control Power Heat Igniter Microprocessor based control center Enhanced diagnostics with LED and reflective sight glass Stores fault codes during power outages Adjustable heating air temperature rise Adjustable cooling airflow Dehumidification selection for summer-time cooling Draft Safeguard switch to ensure proper furnace venting Insulated blower compartment Inner door for tighter sealing INSTALLATION FLEXIBILITY 4-way Multipoise furnace, 13 vent applications Compact design -- only 33-1/3 in. (847 mm) tall APPLICATIONS HYBRID HEAT Dual Fuel System compatible All models are chimney friendly when used with accessory vent kit Comfort Fan--Up to 12 cooling airflow selections from thermostat with a wide range of capability Two--stage heating with single--stage thermostat with patented Adaptive Control Technology CERTIFICATION Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
CVPMA Multi Position Evaporator Coil
CVPMA****XMC AC Only Evaporator M Coil| Cased Multi-Position Note: Follow Evaporator Application Install Instructions found in Product Data
Nomenclature Example & Description CVPMA6124XMC C = Coil / Product V = V-Coil / Type P = Puron® Refrigerant (R-410A) / Refrigerant Type M = Multi-poise / Coil Configuration A = Major Series / Cabinet Finish 60 - 62 = 5 Ton / Unit Capacity (Nom.) 24 = 24-in (610 mm) / Cabinet Width (Nom.) X = TXV / Metering Device M= Microchannel / Tubing Design C = Cooling only / Variations
This evaporator coil incorporates proven standards for reliable system operation and performance throughout the life of this product. These quality coils, manufactured and installed as part of a total comfort system, provide AHRI-rated performance ratings and are additionally listed with UL and c-UL. Available for use in Puron® R-410A refrigerant only, it is a cased V-coil that is housed in a durable, 24-gauge, pre-painted taupe metallic cabinet. The fully insulated cabinet (foil faced with R-2.1 insulation) provides for quiet efficient operation of the evaporator coil.
IMPORTANT: This design is for AC applications only.
DESIGN FEATURES Performance - Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics. Thermostatic Expansion Valves (TXV) - All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve. Durable Condensate Pan - The corrosion-resistant drain pan is designed of a “Polybutylene terephthalate” material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort. Condensate Drain Pan Plugs - The drain pan is supplied with five water-tight drain plugs (three vertical; two horizontal) to prevent leakage from unused drain connections. Refrigerant Connections - Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube—once the pipe swages are cut off—to accommodate braze-less compression fittings. Burst Pressure - Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling-only application. UV Knockout - This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Serviceability - Comes with a “no delta plate” for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools. Prop 65 Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
