Carrier Comfort 4.0 ton 15 SEER2 1 Stg. AC w/110K 1 Stg. 80% VS Gas Furnace|Multi-Position|24SCA548 CVPMA4921XMC 58SC0A110E21--20

Special Price $5,804.00 Regular Price $7,255.00
In stock
Comfort 15 SEER2 1 Stg AC| 24SCA548 CVPMA4921XMC 58SC0A110E21--20


Save an additional10%, use coupon code save10!
*Important note regarding this item:
For Inventory Verification call 1-866-598-7281
Free Shipping in the Continental US!

24SCA5 15 SEER2 Comfort Air ConditionerFeatures / Benefits

13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2 – 13.0 EER2 (11.2 - 13.0 EER)
Microtube Technology refrigeration system
Indoor air quality accessories available
Puron refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost.
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Filter drier
WeatherArmor™ Protection Package:
Solid, durable sheet metal construction
Dense wire coil guard
Long–line – up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer.


The 58SC0A/58SC1A Comfort™ Series 4-way Multipoise Gas Furnaces feature Carrier’s QuieTech™ noise reduction system for
incredibly quiet induced draft operation. Applications are easy with 4-way multipoise design, through-the-furnace downflow venting, 13 different venting options, and designed for easy service access. An inner blower door is provided for tighter sealing in sensitive applications. The 58SC0A/58SC1A furnaces are approved for use with natural or propane gas, and the 58SC1A- Low NOx units are designed for California installations and can be installed in air quality management districts with a 40 ng/J NOx emissions limit.

• QuieTech™ noise reduction system
• Fixed-Speeds, Constant Torque (FCT) ECM blower motor
• Microprocessor based control center
• Adjustable heating air temperature rise
• Adjustable cooling airflow
• Enhanced diagnostics with LED and reflective sight glass
• Stores fault codes during power outages
• Power Heat™ Igniter
• Draft safeguard switch designed to ensure proper furnace venting
• Inner door for tighter sealing, fully insulated blower compartment
• 4-way Multipoise furnace, 13 vent applications
• HYBRID HEAT® Dual Fuel System compatible
• All models are chimney friendly when used with accessory vent kit
• Select sizes approved for twinning, refer to accessory kit listing
• Compact design - only 33-1/3 in. (847 mm) tall
• Propane convertible with gas conversion accessory
• Convenient Air Purifier and Humidifier connections
• Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air
leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with
ASHRAE standard 193
• Residential installations eligible for consumer financing through the
Retail Credit Program

CVPMA Multi Position Coil

This evaporator coil incorporates proven standards for reliable system operation and performance throughout the life of this product. These quality coils, manufactured and installed as part of a total comfort system, provide AHRI-rated performance ratings and are additionally listed with UL and c-UL.
Available for use in Puron® R-410A refrigerant only, it is a cased V-coil that is housed in a durable, 24-gauge, pre-painted taupe metallic cabinet. The fully insulated cabinet (foil faced with R-2.1 insulation) provides for quiet efficient operation of the evaporator coil.

IMPORTANT: This design is for AC applications only.

Performance - Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
Thermostatic Expansion Valves (TXV) - All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
Durable Condensate Pan - The corrosion-resistant drain pan is designed of a “Polybutylene terephthalate” material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
Condensate Drain Pan Plugs - The drain pan is supplied with five water-tight drain plugs (three vertical; two horizontal) to prevent leakage from unused drain connections.
Refrigerant Connections - Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube—once the pipe swages are cut off—to accommodate braze-less compression fittings.
Burst Pressure - Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling-only application.
UV Knockout - This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
Serviceability - Comes with a “no delta plate” for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer.

More Information
Brand/ Manufacturer Carrier
Model #24SCA548 CVPMA4921XMC 58SC0A110E21--20
System TypeCooling with Gas Heat
Product SeriesComfort 15 SEER2 1 Stg AC
Nominal SEER15 SEER
System SEER14 SEER
Rated SEER14.5
Rated EER12.5
Install PositionMulti-Position
AFUE %80%
Pad Size36x36x3
Suction Line Size7/8"
Liquid Line Size3/8"
Write Your Own Review
You're reviewing:Carrier Comfort 4.0 ton 15 SEER2 1 Stg. AC w/110K 1 Stg. 80% VS Gas Furnace|Multi-Position|24SCA548 CVPMA4921XMC 58SC0A110E21--20
Ask a question