Carrier Performance 19 SEER Horizontal Discharge/ Variable Speed Heat Pump System (Crossover system provides a VS alternative at lower purchase costs than the Infinity VS, great option for replacing any brand conventional residential heat pump) 38MURAQ18AA3 40MUAAQ18XA3
Energy Efficiency • 14.7 - 18 SEER2 / 8.2 - 12.4 EER2 / 8.2 - 9.8 HSPF2 Sound • Levels as low as 54 dBA Design Features • Small Footprint • Integrated 24V and RS-485 communications Reliability, Quality and Toughness • Inverter-driven, variable speed, rotary Compressor • Line lengths up to 213' (65 m) • Low ambient operation on high heat models down to -22F (-30C) without the use of wind baffles • Conventional line set sizes
NOTE: Ratings contained in this document are subject to change at any time. Always refer to the AHRI directory (www.ahridirectory.org) for the most up−to−date ratings information.
40MUAA Crossover Air Handler
NOTE: The unit is NOT equipped with a single point electrical connection for electric heater, air purifier or other peripherals. A separate power supply is required.
INDUSTRY LEADING FEATURES / BENEFITS SECURE OPERATION If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through the ductwork. In addition, since outdoor units can be installed close to an outside wall, coils are protected from vandals and severe weather.
FAST INSTALLATION This compact ductless system is simple to install. This makes the air handler systems the equipment of choice, especially in retrofit situations. On all indoor units, service and maintenance expense is reduced due to easy accessible service panels. In addition, these air handler systems have extensive self-diagnostics to assist in troubleshooting.
BUILT-IN RELIABILITY The air handler system indoor and outdoor units are designed to provide years of trouble-free operation. The air handler indoor units include protection against freeze-up and high evaporator temperatures on heat pumps. The condensing units on the heat pumps are protected by a three minute delay that provides over-current protection and high temperature protection prior to the start of the compressor.
ECONOMICAL OPERATION The air handler system design allows individual or multi-room heating or cooling when required. There is no need to run large supply-air fans or chilled water pumps to handle a few spaces with unique load patterns.
EASY-TO-USE CONTROLS The air handler units have microprocessor-based controls to provide the ultimate in comfort and efficiency. The user-friendly control provides the interface between the user and the unit.
MULTI-POISE INSTALLATION Designed for maximum installation flexibility. The secondary drain builtin allows the unit to be mounted in an upflow, downflow, left or right installation depending on existing conditions.
24V INTERFACE The built-in 24V Interface allows users to control the system with a third party thermostat.
AGENCY LISTINGS All systems are listed with AHRI (Air Conditioning, Heating & Refrigeration Institute), UL/ETL and CSA.
OPTIONAL ELECTRIC HEATER KIT FOR AIR HANDLER DUCTED SYSTEMS
Features • 208/230/240V Electric Heater Kits • Mounts directly to the supply duct connection of the Air Handler • Plug-in wiring harness for ease of installation into air handler
IMPORTANT: A separate power is required for an Auxiliary Electric Heater. Do not power the electric heater directly from the outdoor unit. Always follow the recommendations listed on the installation instructions manuals. Only use the Heaters with the compatible indoor units.
Special Price $244.76 Regular Price $305.95
